Back to articles
Articles
Volume: 14 | Article ID: art00060_1
Image
Coloration Systems for Ink Jet Printing of Textiles
Wayne C. Tincher
Qiang Hu
Xiaofei Li
Yingnan Tian
Jianming Zeng
  DOI :  10.2352/ISSN.2169-4451.1998.14.1.art00060_1  Published Online :  January 1998
Abstract

Little detailed information has been published on ink formulations for ink jet printing on textile substrates. Requirements for coloration systems for textile printing will be reviewed and approaches for achieving the desired characteristics will be suggested. Coloration systems based on polymerizable resins with solvent dyes, two phase inks with pigments and inks based on polymerizable dyes will be described. Sample coupons employing these experimental systems were prepared on a TOXOT continuous ink jet printer and properties of these experimental systems on textile substrates will be reported (fastness properties, bending rigidity, etc.)

Journal Title : NIP & Digital Fabrication Conference
Publisher Name : Society of Imaging Science and Technology
Publisher Location : 7003 Kilworth Lane, Springfield, VA 22151, USA
Subject Areas :
Views 7
Downloads 0
 DOI 10.2352/ISSN.2169-4451.1998.14.1.art00060_1
 articleview.views 7
 articleview.downloads 0
  Cite this article 

Wayne C. Tincher, Qiang Hu, Xiaofei Li, Yingnan Tian, Jianming Zeng, "Coloration Systems for Ink Jet Printing of Textiles"  in Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP14),  1998,  pp 243 - 246,  https://doi.org/10.2352/ISSN.2169-4451.1998.14.1.art00060_1

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 1998
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA
2169-4451(19980101)1998:1L.243;1-
nip_v1998n1/splitsection60.xml
/ist/nipdf/1998/00001998/00000001/art00060
Articles
Coloration Systems for Ink Jet Printing of Textiles
TincherWayne C.
HuQiang
LiXiaofei
TianYingnan
ZengJianming
01011998
1998
1
243
246
1998
Little detailed information has been published on ink formulations for ink jet printing on textile substrates. Requirements for coloration systems for textile printing will be reviewed and approaches for achieving the desired characteristics will be suggested. Coloration systems based on polymerizable resins with solvent dyes, two phase inks with pigments and inks based on polymerizable dyes will be described. Sample coupons employing these experimental systems were prepared on a TOXOT continuous ink jet printer and properties of these experimental systems on textile substrates will be reported (fastness properties, bending rigidity, etc.)