Back to articles
Volume: 14 | Article ID: art00050_1
Uniformity Middle Ware for Photo-Printing
  DOI :  10.2352/ISSN.2169-4451.1998.14.1.art00050_1  Published OnlineJanuary 1998

An effective and flexible photo-printing controller for D2T2 (Dye Diffusion Thermal Transfer) and photo inkjet is proposed. The objectives of the present work are to develop the controller architecture using RISC (Reduced Instruction Set Computer) processor and its middle-ware especially used for uniformity correction. In present architecture, the middle-ware provides functional compatibility in the middle layer between hardware and application software.

Subject Areas :
Views 6
Downloads 0
 articleview.views 6
 articleview.downloads 0
  Cite this article 

Keiki Yamada, "Uniformity Middle Ware for Photo-Printingin Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP14),  1998,  pp 202 - 205,

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 1998
NIP & Digital Fabrication Conference
nip digi fabric conf
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA