Back to articles
Articles
Volume: 14 | Article ID: art00022_2
Image
The Characteristics of Ghost Mechanism in a Non-Magnetic Single Component Process Depends on a Diameter of the Toner Particle
  DOI :  10.2352/ISSN.2169-4451.1998.14.1.art00022_2  Published OnlineJanuary 1998
Abstract

A non-magnetic single-component process is produced and reported for basic development characteristics.For example, the characteristics of development mechanism using an elastic development roller depend on the resistance of a development roller, the mechanism of the thin toner layer formation with a doctor blade, the toner sticking phenomena on the doctor blade and the ghost formation mechanism for the surface potential of the development roller with high resistance.The uniformity of development ability for half tone image is a significant subject in a contact single-component non-magnetic development system. And we found the ghost formation is explained by the difference of the toner diameter on the surface of the development roller before the development to the photoconductor.

Subject Areas :
Views 6
Downloads 1
 articleview.views 6
 articleview.downloads 1
  Cite this article 

Toshihiko Takaya, Tadashi Iwamatsu, Nobuyuki Azuma, "The Characteristics of Ghost Mechanism in a Non-Magnetic Single Component Process Depends on a Diameter of the Toner Particlein Proc. IS&T Int'l Conf. on Digital Printing Technologies (NIP14),  1998,  pp 422 - 424,  https://doi.org/10.2352/ISSN.2169-4451.1998.14.1.art00022_2

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 1998
72010410
NIP & Digital Fabrication Conference
nip digi fabric conf
2169-4451
Society of Imaging Science and Technology
7003 Kilworth Lane, Springfield, VA 22151, USA