Back to articles
Volume: 27 | Article ID: art00030
Angular Color Prediction Model for Anisotropic Halftone Prints on a Metallic Substrate
  DOI :  10.2352/J.ImagingSci.Technol.2019.63.4.040407  Published OnlineJuly 2019

Under specular reflection, non-isotropic halftones such as line halftones printed on an ink-receiving plastic layer superposed with a metallic layer change their colors upon in-plane rotation of the print. This color change is due to the orientation-dependent optical dot gain of the halftone. A strong dot gain occurs when the incident light is perpendicular to the halftone line structure. A color prediction model is proposed which predicts under specular reflection the color of cyan, magenta and yellow line halftones as a function of the azimuthal rotation angle, the incident angle and the line frequency. The model is calibrated by measuring 17 reflectances at the (25° : 25°) measurement geometry, with the incident light parallel to the halftone lines. The model has been tested for several azimuthal rotation and incident viewing angles, each time for 125 different cyan, magenta and yellow ink surface coverages. The obtained prediction accuracies are between ΔE94 = 3.5 and ΔE94 = 7.

Subject Areas :
Views 1
Downloads 0
 articleview.views 1
 articleview.downloads 0
  Cite this article 

P. Pjanic, L. Yang, A. Teleman, R. D. Hersch, "Angular Color Prediction Model for Anisotropic Halftone Prints on a Metallic Substratein Proc. IS&T 27th Color and Imaging Conf.,  2019,  pp 159 - 169,

 Copy citation
  Copyright statement 
Copyright © Society for Imaging Science and Technology 2019
Color and Imaging Conference
color imaging conf
Society for Imaging Science and Technology